Pneumatic Fenders (CHN)

Floating pneumatic rubber fenders can be easily handled and installed with guy-rope or guy-chain because of its light weight. It can resist the shearing force and maintain energy absorption level under inclined compression up to 15 degrees. Meanwhile, provide the low and comparatively even hull pressure.
Floating pneumatic rubber fenders, know as Yokohama Type Pneumatic Rubber Fenders, shall consist of an out rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly. These several synthetic-cord layers and tough abrasion resistant out rubber, they have consistent performance even under rough condition and cyclic load. The maintenance cost and damage risk are minimised too. The best material also ensure the self-buoyancy and extremely long service life.

Construction of Pneumatic Fenders

-- The out rubber are used to protect the cord layers and inner rubber from abrasion Pneumatic Fenders, Pneumatic Rubber Fenders, Floating Pneumatic Rubber Fenders, Floating Fenders, ship fenders, marine rubber fenders, rubber fenders, marine fenders, Yokohama fenders, Yokohama pneumatic fenders, Yokohama pneumatic rubber fenders, Yokohama type fenders, port fenders, dock fenders, floating ship fenders, floating yokohama fendersand other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
-- The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender
-- The inner rubber layer seals the pressurized air inside the fender
-- Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
-- The outside chain and tire net provide the extra protection for the fender body.

Pneumatic rubber fenders Type

Buoder make floating pneumatic rubber fenders with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve Pneumatic Fenders, Pneumatic Rubber Fenders, Floating Pneumatic Rubber Fenders, Floating Fenders, ship fenders, marine rubber fenders, rubber fenders, marine fenders, Yokohama fenders, Yokohama pneumatic fenders, Yokohama pneumatic rubber fenders, Yokohama type fenders, port fenders, dock fenders, floating ship fenders, floating yokohama fenderssetting pressure and hydraulic test pressure are also in compliance with the requirements of ISO 17357:2014 Floating Pneumatic Rubber Fenders (High Pressure and Low Pressure).

There are two type pneumatic fenders. One is Sling Type pneumatic rubber fenders, which have lifting device on each end used to connect with the guy-chain or rope. Another is Net Type pneumatic rubber enders, the pneumatic fender body was convered by a chain and tire/firbre net. And, we also make rib type neumatid fenders.

 
pneumatic rubber fender
pneumatic rubber fender
pneumatic rubber fender
 
net pneumatic rubber fender
Net Type Pneumatic Fenders
sling pneumatic rubber fender
Sling Type Pneumatic Fenders
pneumatic rubber fender
Pneumatic Fenders Compression Test
 

Floating Pneumatic Rubber Fender Performance

The performance of floating pneumatic rubber fenders shall be specified in terms of Guaranteed Energy Absorption (GEA), Reaction Force at GEA deflection, and Hull Pressure at GEA deflection.
pneumatic rubber fender specification
The really Yokohama Type Pneumatic Rubber Fenders, made by mold based on Korean Production Technology.